Installation procedure, Adjust the height of the shelf if required, Organising the wiring – Panasonic TYST42PF3 User Manual

Page 6: English

Advertising
background image

6

English

4. Adjust the height of the shelf if required.

The height of the shelf can be adjusted
to a height of either 35 cm (13

25

/

32

in.)

from the floor or 50 cm (19

11

/

16

in.) from

the floor.
Use the following procedure to adjust
the height of the shelf if required.

Remove the screws which secure
the shelf to the supports.

Move the shelf to the required
height, and then secure it by
tightening the screws.

• To loosen the cable strap:

While pushing in

the direction of the
arrow

Loosen the cable

strap.

N o t e

Note

5. Organising the wiring

Insert the accessory cable straps into
the appropriate cable strap mounting
holes in the rear of the support.

Bring together the input cables which
are connected to the terminals at the
bottom of the Wide Plasma Display
and secure them with the cable straps.

Installation procedure

350 mm
(13

25

/

32

in.)

or
500 mm
(19

11

/

16

in.)

Cable

Cable
straps

2

1

ST42PF3E改-4-11/10最終 00.11.22 8:48 AM ページ 6

Advertising