Registering a unit – Panasonic KXTG7431 User Manual

Page 26

Advertising
background image

Programming

26

For assistance, please visit http://www.panasonic.com/help

Registering a unit

Operating additional units

Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
L

See page 4 for information on the
available model.

Registering a handset to a
base unit

The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, re-register the handset.

1

Handset:
{

MENU} (center of joystick) i

{#}{

1}{3}{0}

2

Base unit:
Press and hold {LOCATOR} for
about 4 seconds until the
registration tone sounds.
L

If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.

L

The next step must be completed
within 90 seconds.

3

Handset:
Press {OK}, then wait until a long
beep sounds.

4

{

OFF}

Note:
L

While registering, “Base
regtr’ing”
(Base registering) is
displayed on all registered handsets.

L

When you purchase an additional
handset, refer to the additional
handset’s installation manual for
registration.

Deregistering a handset
A handset can cancel its own
registration (or the registration of
another handset) that is stored to the
base unit. This allows the handset to end
its wireless connection with the system.

1

{

MENU} (center of joystick) i

{#}{

1}{3}{1}

2

{

3}{3}{5} i {OK}

3

Select the handset you want to
cancel by pressing the desired
handset number.

4

{V}

/{^}: “Yes” i {SELECT}

TG743x(e).book Page 26 Monday, December 8, 2008 1:36 PM

Advertising