Panasonic KXTG7431 - Manual (Page 29)

Caller ID Service
29 For assistance, please visit http://www.panasonic.com/help
For example, you can use this feature to
set the unit to ignore the area code of
callers in your area, so that you can call
these local numbers using caller
information without dialing the area
code.
To activate this feature, you must edit an
entry in the caller list, then call that
number. After that, phone numbers from
that caller’s area code are edited
automatically.
This feature can be turned on or off
(page 20).
Note:
L
Phone numbers from the 4 most
recently edited area codes are
automatically edited.
L If you move to another area, you can
turn this feature off to erase previously
edited area codes. To use this feature
again, turn it on and reprogram the
area codes you want to edit once
again.
Erasing selected caller
information
1
{ MENU} (center of joystick) i
{#}{ 2}{1}{3}
2
{V}
/{^}: Select the desired entry.
3
{ ERASE} i {V}/{^}: “Yes” i
{
SELECT} i {OFF}
Erasing all caller information
1
{ MENU} (center of joystick) i
{#}{ 2}{1}{3}
2
{ ERASE} i {V}/{^}: “Yes” i
{ SELECT}
Storing caller information to
the phonebook
1
{ MENU} (center of joystick) i
{#}{ 2}{1}{3}
2
{V} /{^}: Select the desired entry.
i {SELECT}
L
To edit the number, press {EDIT}
repeatedly until the phone
number is shown in the desired
format.
3
{ SAVE}
4
{V}
/{^}: “Phonebook” i
{
SELECT}
5 Continue from step 2, “Editing
entries”, page 17.
TG743x(e).book Page 29 Monday, December 8, 2008 1:36 PM