Panasonic DMC-LZ30K - Manual (Page 110)

- 110 -
VQT4V99
Printing
●
Do not use any other USB connection cables except the supplied one. Doing so may
cause malfunction of the camera.
●
Disconnect USB connection cable after printing.
●
Turn off the camera before inserting or removing memory cards.
●
If the batteries run out while transmitting, a warning beep sounds. Cancel printing and
disconnect USB connection cable. Use batteries with sufficient power.
●
Motion pictures cannot be printed.
Printing multiple pictures
Connect camera to printer
•Do not use any other USB connection cables except the supplied one. Doing so
may cause malfunction of the camera.
Use cursor button on the camera to select [PictBridge(PTP)],
and press [MENU/SET]
Press
Use cursor button to select item and press [MENU/SET]
• [Multi Select]: Scroll between pictures with cursor button, select pictures
to print with the [DISP.] button. (Press [DISP.] button again
to release selection.)
Press [MENU/SET] when selection is complete.
• [Select All]: Print all pictures.
Use cursor button to select [Print start] and press [MENU/SET]
(Print settings (→111))
•Select [Yes] if print confirmation screen is displayed.
●
An orange “
●
” displayed during printing indicates an error message.
●
Print may be divided into several pictures if printing a large amount of pictures.
(Remaining sheets display may differ from the number of pictures set for printing.)