Panasonic FV-20VQ3 - Manual (Page 5)

5
INSTALLATION I (SUSPENDED CEILING)
1. Disconnect plug connector from receptacle before start-
ing installation.
2. Assemble suspension bracket and rubber 1 to body.
(Fig. 1)
3. Suspend body with anchor bolts. (not supplied) (Fig. 2)
4. Remove junction box cover and secure conduit to junc-
tion box knockout hole. (7/8 inch) (Fig. 3)
5. Refer to wiring diagram
Using wire nuts, connect house power wires to ventilat-
ing fan wires (Fig. 3): black to black; white to white;
green to greens.
Replace junction box cover.
CAUTION
Mount junction box cover carefully so that lead
wires are not pinched.
Wiring Diagram
6. Install circular duct (6 inch) and secure it with tape.
7. Finish ceiling work. Ceiling hole should be aligned with
fan opening.
8. Connect plug connector to receptacle.
9. Insert mounting springs into slots as shown and mount
grille to fan body. (Fig. 4)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Suspension bracket
Screw
Rubber 1
Rubber 1
Anchor bolt
Body
Anchor bolt (Not supplied)
Rubber
2 and 3
Washer
Anchor
bolt
Green wires
Junction box
Conduit
Wire nut
Lead wires
Grille
Slot Mounting spring
Motor
White
Thermal Cut Off
Power Supply
AC120V 60Hz
Earth
White White
Neutral
Red
Black Black Black
Green Green
Capacitor
Live
Panasonic_E 19/02/02, 11:25 AM Page 5 Adobe PageMaker 6.5C/PPC