Panasonic TC-60AS650U - Manual (Page 76)

- 76 -
Multi shot 3D
3D images can be created by selecting 2 photos in thumbnail view.
1. Select first photo and press
(Red)
2. Select second photo and press (Red)
● To select the second image, the size and date must be the same as the
first image.
●
and are displayed at the top left-hand corner of selected
photos.
3. Start Conversion processing by pressing
Conversion processing message will be displayed.
● Error message will be displayed if first and second picture have no
relation, or for other reasons. (e.g. size / date is different)
4. 3D photo is created
5. Save the 3D image generated by the above steps to the original drive.
Confirmation message will be displayed and select Yes to
save the data. (SD card only)