Panasonic TC-58AX800U - Manual (Page 24)

- 24 -
2. Select input and display
1) Display Input select menu (with the connected equipment turned On)
INPUT
2) Select the input HDMI 4/DisplayPort input using / and press
● The menu choices vary depending on which input is selected.
3. Set the related settings
For DisplayPort:
DisplayPort settings ( Stream setting )
MENU Menu > Setup > DisplayPort settings
For HDMI 4:
ARC output ( HDMI 2 / HDMI4 )
MENU Menu > Sound > ARC output
Select ARC output terminal settings.
● When using an amplifier that supports the 4K format, select HDMI4
after connecting the amp to HDMI4 terminal.
HDMI4 HDCP setting ( 2.2 / 1.4 )
MENU Menu > Sound > HDMI4 HDCP setting
Select HDCP version.
●
This TV supports the signals up to HDCP 2.2, but the HDCP 2.2
correspondence signal is restrictive. Select 1.4, if the contents are
not displayed by a desired signal of a supported HDCP 1.4 signal.