Panasonic TC-58AX800U - Manual (Page 49)

- 49 -
Registering 3D Eyewear
■
Eyewear initial setup
To pair the 3D Eyewear with the TV for the first time, follow these steps:
1. Turn the TV on
2. Place the 3D Eyewear within 1.6 ft. (50 cm) of the TV.
3. Remove the temporary pull tab to enable the battery.
4. Press and hold the power button on the 3D Eyewear for 1 second.
●
The LED will light for 2 seconds and then flash.
●
The 3D Eyewear will turn on and pairing will begin.
● A confirmation message will be displayed on the TV.
After the pairing process is complete, the 3D Eyewear will automatically
reconnect with the TV anytime it is turned on near the TV. The TV should
be in 3D mode.
●
The 3D Eyewear will turn off automatically when not paired with the TV
or when 2D content is displayed.