Changing the system frequency – Panasonic DMC-GH4KBODY User Manual

Page 67

Advertising
background image

67

Motion Picture

(ENG) VQT5H68

To cancel [Variable Frame Rate]
Select the [OFF] setting in step

4

.

To change the frame rate
Select the [SET] setting in step

4

.

When [Rec Format] is set to [AVCHD], you cannot set a frame rate with a number of frames

greater than 60fps.

When you play back a motion picture recorded with [Variable Frame Rate], the recording time

display for motion pictures on the top right of the screen will look different from the one that

appears during normal motion picture playback.

[

]: Actual playback time

[

]: Actual elapse of time during which you recorded the motion picture

You can change the system frequency of the motion pictures you record and play back.

When creating a motion picture that has a broadcasting system different from your region

or when recording a motion picture for a film, change the system frequency.

1

Select the menu. (P28)

2

Press 3/4 to select an item and then press [MENU/SET].

A message prompting you to restart the camera will be displayed. Turn off and on the camera.

By default, the system frequency is set to the broadcasting system of your purchase region,

[59.94 Hz (NTSC)] or [50.00 Hz (PAL)].

When [System Frequency] is set to a broadcasting system different from that of your

region, images may not be played back correctly on the TV.

If you are not familiar with broadcasting systems or will not be creating any motion

pictures for films, we recommend that you use the default setting.

If you changed the setting but are not sure about the system frequency for the broadcasting

system of your region, perform [Reset] in the [Setup] menu (P29).

Once you change the system frequency
After changing the [System Frequency] setting, motion pictures may not be recorded or

played back if you continue to use the card that was inserted in the camera. We

recommend that you replace the card with another one and format (P29) it on the camera.

If you continue to use the card that was inserted

in

the camera before you changed the setting,

the camera will operate as follows:

Changing the system frequency

Applicable modes:

>

[Setup]

> [System Frequency]

[59.94 Hz (NTSC)]

For regions where the TV broadcasting system is NTSC

[50.00 Hz (PAL)]

For regions where the TV broadcasting system is PAL

[24.00 Hz (CINEMA)]

This system frequency is for creating films

[Rec Format]

[Rec]

[Playback]

[AVCHD]

Recording is not
possible

You cannot play back motion pictures
recorded before you changed the setting.

Motion pictures recorded with a
different [System Frequency] setting
cannot be played back.

[MP4]/[MP4 (LPCM)]/[MOV] Recording is possible

XXmXXs
XXmXXs

MENU

DMC-GH4_PPC-VQT5H68_eng.book 67 ページ 2014年3月12日 水曜日 午後10時35分

Advertising
This manual is related to the following products: