Power supply, Charging the battery – Panasonic HX-A500H User Manual
Page 14
14
SQT0251 (ENG)
Charging the battery
≥
This unit has a built-in rechargeable lithium-ion battery. Do not remove except when
disposing of this unit. (
l
30)
≥
The battery will not be charged if this unit is turned on. Connect it with the PC to charge
the battery after turning it off.
≥
It is recommended to charge the battery in a temperature between 10
o
C and 30
o
C (50
o
F
and 86
o
F).
A
LOCK switch
B
USB cable (supplied)
C
Unlocked when the red indicator is visible
D
Turn the side with the symbol up to connect the micro B end of the USB cable to the USB
terminal of this unit.
1
Slide the LOCK switch to the left to unlock the side cover and slide the side
cover downward to open it.
2
Connect the USB terminal of this unit to a PC with the USB cable (supplied).
≥
Insert the USB cable securely all the way.
≥
The Power lamp will flash red at an interval of 2 seconds (approximately 1 second on, 1 second
off), indicating that charging has begun.
It will turn off when the charging is completed.
≥
Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
≥
Do not heat or expose to flame.
≥
Do not leave the unit (including built-in battery) in a car exposed to direct sunlight for a long
period of time with doors and windows closed.
≥
If operating time is short even after fully charging the battery, the battery is worn out and needs to
be replaced. Please contact your dealer.
Preparation
Power supply
When this unit is purchased, the battery is not charged. Charge the battery fully before
using this unit for the first time.
HX-A500-SQT0251_mst.book 14 ページ ２０１４年４月１４日 月曜日 午後６時１５分