Panasonic HX-A500H User Manual

Page 23

Advertising
background image

23

(ENG) SQT0251

3

Hook the Head Mount to your ears
firmly so that the camera unit will be
positioned on the left side of your
face.

4

Adjust the size of the Head Mount,
and push down the lock lever to the
LOCK side.

Adjust by slowly pulling the Head Mount (R)
sideways.

If you adjust in such a way that the camera unit comes into close contact with the cheek, you can
record less blurry images.

5

Hold the camera holder, and adjust
the direction of the lens.

To loosen the adjustment knob, rotate it
towards

1

. To tighten the adjustment knob,

rotate it towards

2

.

If the direction of the lens cannot be changed,
loosen the adjustment knob slightly and tighten
it after adjusting the direction of the lens.

If the camera unit is shaky, tighten the
adjustment knob.

How to remove the camera

Hold the camera holder as shown in the figure, and remove the
camera unit in the direction of the arrow.

Do not touch the lens or pull the camera/main unit connection cable while attaching or removing.

When adjusting the size of the Head Mount and the tightness of the Headband, do so slowly
without applying too much force.

If the adjustment knob comes off, attach it as indicated in the
right figure.

We recommend you make a test recording to check the settings such as the [ANGLE OF VIEW],
[LEVEL SHOT], [IMAGE STABILIZATION] and [WHITE BALANCE] before recording.

Please refer to “Owner’s Manual (PDF format)“ for details.

Things to check after putting on this unit

D

Adjustment knob

E

Camera holder

HX-A500-SQT0251_mst.book 23 ページ 2014年4月14日 月曜日 午後6時15分

Advertising