Panasonic SH-FX65 - Manual (Page 4)

RQ
TX
00
47
4
Setup
Setup
Preparation
≥ Turn off all equipment before connection and read the appropriate operating instructions.
≥Connect the AC power supply cord after all other connections are complete.
∫ Wireless setup diagram
e.g.
Place the wireless system within approximately 10 m (33 ft) from the
home theater unit.
[Note[
Do not use the wireless system and digital transmitter in a metal cabinet
or bookshelf.
Home theater unit (with the digital transmitter)
Do not attempt to connect any extra surround
speakers to the home theater unit.
Surround speaker cables
Wireless
system
The wireless system will automatically seek a clear channel if any of
these other devices interfere with its communication.
When this happens, the wireless link indicator (“
[W1] ” or an indicator)
flashes on the home theater unit, and there is a brief interruption in
audio coming from the surround speakers.
This is the normal operation of the product working to assure the best
possible performance of your home theater unit.
If the interference persists, try moving the other devices to another
location outside the range of the wireless system, or move the wireless
system nearer to your home theater unit.
Wireless LAN:
approx. 2 m (6-1/2 ft)
Cordless phone and other
electronic devices:
approx. 2 m (6-1/2 ft)
Wireless system
To avoid interference, maintain the following distances between
the wireless system and other electronic devices that use the
same radio frequency (2.4 GHz band).
e.g.
RQTX_FX65_En.fm Page 4 Monday, December 4, 2006 3:59 PM