Panasonic SH-FX65 - Manual (Page 7)

R
Q
TX0
047
7
Pr
od
uct ser
v
ice
/ Main
ten
a
nce
/ T
rou
b
lesh
o
o
tin
g gu
ide
Product service
1. Damage requiring service—The unit should be serviced by qualified
service personnel if:
(a) The AC power supply cord or AC adaptor has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change in
performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that described
in these operating instructions. Refer all other servicing to authorized
servicing personnel.
3. Replacement parts—When parts need replacing ensure the servicer
uses parts specified by the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may
result in fire, electric shock, or other hazards.
4. Safety check—After repairs or service, ask the servicer to perform
safety checks to confirm that the unit is in proper working condition.
The servicer will require all components to service your system.
Therefore, should service ever be necessary, be sure to bring the entire
system.
For product information or assistance with product operation:
Refer to “Customer Services Directory” on page 9.
Clean this unit with a soft, dry cloth.
≥ Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, carefully read the instructions that
came with the cloth.
Product information
Maintenance
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt
about some of the check points, or if the solutions indicated in the table do
not solve the problem, refer to the “Customer Services Directory” on page 9.
On your home theater unit
User memo:
The wireless
link indicator
(e.g. “
[W1] ” or
an indicator) is
flashing.
≥ There is no link between the home theater unit and
the wireless system. Turn the wireless system off
and then back on. Alternatively, turn the wireless
system off, disconnect the AC power supply cord,
and then reconnect it.
The wireless
link indicator
(e.g. “
[W1] ” or
an indicator)
does not light.
≥ Check that the home theater unit is turned on, and
the wireless system is turned on.
≥ Ensure that the digital transmitter is fully inserted
into the slot of the home theater unit.
DATE OF PURCHASE __________________________________
DEALER NAME _______________________________________
DEALER ADDRESS ____________________________________
___________________________________________________________________
TELEPHONE NUMBER _________________________________
The model number and serial number of this product can be found on
either the back or the bottom of the unit. Please note them in the space
provided below and keep for future reference.
MODEL NUMBER SH-FX65
SERIAL NUMBER
RQTX_FX65_En.fm Page 7 Thursday, November 30, 2006 11:52 AM