Charging and recording time – Panasonic HX-A100D User Manual

Page 17

Advertising
background image

17

VQT4X87

Charging and recording time

Charging/Recording time

≥ Temperature: 25 oC (77 oF)/humidity: 60%RH

≥ These times are approximations.
The indicated charging time is for when the battery has been discharged completely. Charging time

and recordable time vary depending on the usage conditions such as high/low temperature.

≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping

recording, turning this unit on/off, etc.

≥ The main unit heats up after use or charging. This is not a malfunction.
≥ The power lamp flashes (Flashing with approx. 0.5 second period) when the remaining battery time

becomes low. The remaining battery capacity is displayed on the screen when using Image App (

l 21).

≥ For information about charging with a mobile USB charger or an AC adaptor, check the support

site.
http://panasonic.jp/support/global/cs/e_cam/index.html (This site is English only.)

THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA.

THE FOLLOWING APPLIES ONLY IN LATIN AMERICAN COUNTRIES.

Flashing with approx. 0.5 second period (off for approx. 0.25 second, on for approx. 0.25 second):
≥ Check that the USB terminals of this unit or the connecting device, such as PC are not dirty or covered with a

foreign object, and reconnect correctly. If a foreign object or dirt is present, turn off this unit before removing.

≥ The environment is at an extremely high or low temperature. Wait until the temperature has

returned to an appropriate level and try charging again. If you are still unable to charge, there may
be a fault in this unit or the connecting device.

Flashing with approx. 2 second period (off for approx. 1 second, on for approx. 1 second):
During charging normally (

l 16)

Flashing with approx. 4 second period (off for approx. 2 seconds, on for approx. 2 seconds):
≥ When the battery is over discharged or the temperature of the battery is too high or low. It can be

charged, but it may take a few hours to complete the charging normally.

≥ It will flash in approx. 2 second intervals when normal charging resumes. Even in such cases, it may start

flashing in approx. 4 second intervals until charging is completed depending on the conditions of use.

Charging time

Recording mode

Maximum continuous

recordable time

Actual recordable

time

4 h 30 min

1920

k1080/60p

1 h 50 min

55 min

1920

k1080/30p

2 h 20 min

1 h 10 min

1280

k720/60p

2 h 5 min

1 h 5 min

1280

k720/30p

2 h 35 min

1 h 20 min

640

k360/30p

2 h 45 min

1 h 25 min

1920

k1080/60fps

1 h 50 min

55 min

1280

k720/120fps

2 h 5 min

1 h 5 min

640

k360/240fps

2 h 20 min

1 h 10 min

The power plug is the disconnecting device. Install this unit so that the power plug can be
unplugged from the socket outlet immediately.

The mains plug is the disconnecting device. Install this unit so that the mains plug can be
unplugged from the socket outlet immediately.

When the Power lamp is flashing during charging

HX-A100_VQT4X87_mst.book 17 ページ 2013年1月25日 金曜日 午前9時55分

Advertising