Attach the cord to the main unit, When placing the main unit on a rack or on a table – Panasonic SC-HTB880 User Manual

Page 15

Advertising
background image

Getting started

Precautions

RQT9903

15

Additionally required accessories (commercially available)

≥Fall prevention cord ...................................................................................................................... k 2
≥Screw eyes (to attach the fall prevention cord) ............................................................................. k 2

≥ Use commercially available screws that are capable of supporting over 33 kg (72.8 lbs).
≥ Use a cord that is capable of supporting over 33 kg (72.8 lbs) (with a diameter of about 1.5 mm (

1

/

16

q)).

Attach the cord to the main unit.

A Cord

§

§ If the cord cannot be threaded through the holes, try bending the cord in 2 locations,

about 5 mm (

3

/

16

q) apart from the tip, at an angle of 45

o

(as

illustrated above).

Place the main unit in the desired position and attach each cord onto the
rack or table.

≥ Make sure that the slack of the cord is minimal.
≥ Do not lean the main unit against the TV or wall.

B Screw eye

≥Attach at a position capable of supporting over 33 kg (72.8 lbs).
≥Depending on the placement of the main unit, the screwing position of the screw eye may differ.

When placing the main unit on a rack or on a table

SC-HTB880PP_RQT9903-Y.book 15 ページ 2014年5月8日 木曜日 午後6時13分

Advertising