P139) – Panasonic DMC-GF6KK User Manual
Page 139
139
Recording
Easily Optimizing the Brightness for a Specified
Area
(Touch AE)
Applicable modes:
You can optimize the focus and brightness for a touched position by optimizing the
brightness when using the Touch AF. When the face of the subject appears dark, you can
brighten the screen according to the brightness of the face.
1
Select [Touch Settings] in the [Custom] menu.
2
Select [Touch AF] and then touch [AF+AE].
3
Touch the subject you want to optimize the
brightness for.
•
AF area setting screen is displayed.
•
The brightness optimization position is displayed on the
center of the AF area. The position follows the movement
of the AF area.
•
[Metering Mode] is set to [
], which is used exclusively
for the Touch AE.
•
Touching [Reset] returns the brightness optimization position and the AF area to the
center.
4
Touch [Set].
•
The AF area with the same function as [Ø] is displayed on the touched position.
•
Touching [
] returns [Metering Mode] to the original setting and cancels the
brightness optimization position. The AF area setting is also canceled.
•
Touching [
] returns [Metering Mode] to the original setting and cancels the
brightness optimization position.
•
When recording with the Touch Shutter, the focus and brightness are optimized for the touched
position before recording takes place.
•
At the edge of the screen, the metering may be affected by the brightness around the touched
location.
Not available in these cases:
•
In the following cases, the Touch AE function does not work.
–
When using the Manual Focus
–
When using the Digital Zoom
–
When the AF area has been set by using the cursor button
When the background has become too bright, etc., the
brightness contrast with the background can be
adjusted by compensating the exposure.
ュリヴヱハ
6HW
5HVHW
AE