Panasonic MC-CL935 - Manual (Page 26)

- 26 -
Overload Protector
Belt Reset Button
Botón de
restauración
Bouton de remise
en circuit
➢ The overload protector stops the
Power Nozzle motor when the brush
jams and prevents belt breakage.
NOTE: Canister motor will continue to
run.
TO CORRECT PROBLEM:
➢ Unplug electrical cord.
➢ Check brush and brush support
areas for excessive lint build-up or
jamming.
➢ Clean jammed area.
TO RESET:
➢ Press the belt reset button on top of
the Power Nozzle. Plug in and turn
on vacuum cleaner.