Panasonic DMC-TS5D - Manual (Page 185)

- 185 -
Wi-Fi
Selecting the connection method
You can select the method for connecting to a wireless access point.
¢ WPS refers to a function that allows you to easily configure the settings
related to the connection and security of wireless LAN devices. To check
if the wireless access point you are using is compatible with WPS, refer to
the manual of the wireless access point.
1 Press 3/4 to select the wireless access point you are connecting to, and press
[MENU/SET].
2 Enter the PIN code displayed on the camera screen into the wireless access point.
3 Press [MENU/SET].
•
Refer to the wireless access point instruction manual for details.
Connecting via a wireless access point
Connection method Description of settings
[WPS (Push-Button)]
Save push button type wireless access point that is
compatible with Wi-Fi Protected Setup
TM with a WPS mark.
P185
[WPS (PIN code)]
Save PIN code type wireless access point that is compatible
with Wi-Fi Protected Setup with a WPS mark.
P185
[Manual Connection]
Select this option when you are not sure about the WPS
compatibility, or when you want to search for and connect
to a wireless access point.
P186
When connecting with [WPS (Push-Button)]
Press the wireless access point WPS button until it switches
to WPS Mode.
•
Refer to the wireless access point instruction manual for details.
e.g.:
When connecting with [WPS (PIN code)]