Panasonic MC-UG728 - Manual (Page 26)

- 26 -
Carpet/Bare
Floor Selector
Control para
alfombra/sin
alfombra
Sélecteur
tapis/plancher
➢ Selector should be placed in BARE
FLOOR (TOOLS) position when
using vacuum cleaner on bare
floors and when using tools. The
agitator does not rotate in the BARE
FLOOR (TOOLS) position.
➢ Selector should be placed in
CARPET position when using
vacuum cleaner on carpeted floors.
Carpet/Bare Floor Selector
CAUTION
Incorrect setting may cause floor or
carpet damage.
Body Release
➢ Your vacuum cleaner is equipped
with three (3) position body release;
• Upright position (locked)
• Middle position (normal use)
• Low position (under furniture)
➢ Release the body by pressing down
on the body release pedal with your
foot and pulling back and down on
the handle with your hand.
➢ Move the vacuum cleaner to upright
position for storage and tool use.