Alen C475A - Manual (Page 12)

12
Before Starting This Unit
1) Select a suitable location ,make sure you have easy access to an electrical outlet.
2) Install the Flexible Exhaust Hose and the Adjustable Window Slider Kit as depicted in Fig.7 Fig.7a
NOTE: Step 2) is required only while using the cooling mode.
Fig.7 Fig.7a
3) Plug the unit into the grounded electrical outlet.
4) Make sure the water pump drain hose is correctly installed, as Fig.8 .
5) Press the on/off button to turn on the unit.
Fig.8
1. BEFORE USE
Made sure the duct is installed well.
Dehumidifying and Cooling Operations
- The operating range for dehumidifying is 60 -89 ,and the operating range for cooling operating is 60
-89 .
- If the cooling or dehumidifying operations have been switched off and need switching on again in a short
time, allow approximately three minutes for the cooling or dehumidifying operations to resume.
- Make sure the water pump drain hose is correctly connected to the unit.