Aspire Digital 6930 series - Manual (Page 45)

Chapter 2 35
Main
The Main screen allows the user to set the system time and date as well as enable and disable boot option
and recovery.
NOTE: The screen above is for your reference only. Actual values may differ.
Settings in boldface are the default and suggested parameter settings.
Parameter Description Format/Option
System Time Sets the system time. The hours are displayed with 24-
hour format. Format: HH:MM:SS
(hour:minute:second)
System Date Sets the system date. Format MM/DD/YYYY
(month/day/year)
Total Memory This field reports the memory size of the system.
Memory size is fixed to 4094 MB. N/A
Video Memory Shows the Video memory size. Video Memory size is
fixed to 256 MB N/A
Quiet Boot Select whether to display the logo screen during boot. Option: Enabled or Disabled
Network Boot Enables, disables the system boot from LAN (remote
server). Option: Enabled or Disabled
F12 Boot Menu Enables, disables Boot Menu during POST. Option: Disabled or Enabled
D2D Recovery Enables, disables the Acer D2D Recovery function
during POST by pressing Alt-F10. Option: Enabled or Disabled
SATA Mode
Selection Control the mode in which the SATA controller should
operate. Option: AHCI or IDE Mode
Information Main Security Boot Exit
Item Specific Help
System Time [13:04:04]
System Date [06/04/2008] <Tab>, <Shift-Tab>, or
<Enter> selects field.
Total Memory: 4094 MB
Video Memory: 256 MB
Quiet Boot: [Enabled]
Network Boot: [Enabled]
F12 Boot Menu: [Disabled]
D2D Recovery: [Enabled]
SATA Mode Selection: [AHCI]
F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select XSub-Menu F10 Save and Exit
Phoenix SecureCore(tm) Setup Utility