Aspire Digital 6930 series - Manual (Page 58)

48 Chapter 3
General Information
Pre-disassembly Instructions
Before proceeding with the disassembly procedure, make sure that you do the following:
1. Turn off the power to the system and all peripherals.
2. Unplug the AC adapter and all power and signal cables from the system.
3. Place the system on a flat, stable surface.
4. Remove the battery pack.
Disassembly Process
The disassembly process is divided into the following stages:
• External module disassembly
• Main unit disassembly
• LCD module disassembly
The flowcharts provided in the succeeding disassembly sections illustrate the entire disassembly sequence.
Observe the order of the sequence to avoid damage to any of the hardware components. For example, if you
want to remove the main board, you must first remove the keyboard, then disassemble the inside assembly
frame in that order.
Main Screw List
Screw Quantity Part Number
M2.5*6.5-I (BZN(NYLOK-RED)) 42 86.ARE07.001
M2.0*3.0-I (BKAG)(NYLOK) IRON 10 86.ARE07.002
M2.0*3.0-I-NI-NYLOK 13 86.A08V7.005
M3*0.5+3.5I 8 86.TDY07.003
M2.5*2.5-I (NI)(NYLOK) 6 86.T25V7.010
M2.5*4.0-I (NI)(NYLOK) 7 86.D01V7.001
M2.5*5-I (BNI)(NYLOK) 4 86.A03V7.003
M2.5*8-I BNI NYLOK 4 86.T48V7.001