ADT Security Services VISTA-15 - Manual (Page 5)

- 5 -
System Overview
(cont'd)
The following table lists the five different arming modes and the
features of each.
FEATURES OF EACH ARMING MODE
ARMING
MODE
Exit
Delay
Entry
Delay
Perimeter
Armed
Interior
Armed
AWAY Yes Yes Yes Yes
NIGHT-STAY Yes Yes Yes Yes*
STAY Yes Yes Yes No
INSTANT Yes No Yes No
MAXIMUM Yes No Yes Yes
* for selected interior zones (ask your installer about the included zones)
Security Codes
At the time of installation, you were assigned a personal four-digit
security code, known only to you. You must enter the security code
when arming and disarming the system, and when performing other
system functions. As an additional safety feature, other users who do
not need to know your code can be assigned different security codes.
Refer to the Security Codes section for procedures on adding security
codes to the system.
Fire Protection
The fire protection portion of your security system (if used) is always
active and will sound an alarm if a fire condition is detected. Refer to
the Fire Alarm System section for important information concerning
fire protection, smoke detectors, and planning emergency exit routes
from the premises.
Alarms
When an alarm occurs, both the keypad and external sounders will
sound, and the keypad will display the zone(s) causing the alarm. If
your system is connected to a central monitoring station, an alarm
message will also be sent. To stop the alarm sounding, simply disarm
the system.