Panasonic TYWK42PR7 - Manual (Page 6)

12
English
Installation procedure
5
0
10
15
20 Wall-hanging bracket
Fixing screws (left and right)
(M5-35)
Fixing screw mounts
• Tighten the accessory fixing screws into the
fixing screw (M5-35) flanges at the left and
right sides of the wall-hanging bracket.
• Be sure to tighten the left and right fixing screws to prevent the display from detaching from the wall-hanging
bracket.
Caution
5. Installing the display to the wall-hanging bracket
6. Securing the display
Installation procedure
Fit the insulating spacers on the upper part
of the display into the notches at the top of
the wall-hanging bracket.
While lifting the display up slightly, insert
the insulating spacers on the lower part of
the display into the notches in the lower
part of the wall-hanging bracket.
Lower the display into place.
5
0
10
15
20
5
0
10
15
20
Fixing screws
Insulating spacer
Insulating spacer
• Do not lift the display too high, otherwise it may become unhooked.
Note