Accton Technology EC3805 - Manual (Page 12)

12
4. The Internet Protocol (TCP/IP) Properties window appears. On the General tab:
1) For the case DHCP Server of Smart Router is enabled, enable Obtain an IP
address automatically and click OK.
2) For the case DHCP Server of Smart Router is enabled or you want to set the IP
address by yourself, enable Use the following IP address and fill in the IP
address field with the address of the same subnet with Smart Router, for example,
192.168.1.100; the Subnet mask field with value 255.255.255.0 and the Default
gateway field with the IP address of Smart Router (192.168.1.254) and then click
OK.