Atmel ATAVRAUTO100 - Manual (Page 11)

Using the ATAVRAUTO100
ATAVRAUTO100 User Guide 2-12
7697B–AUTO–09/07
Figure 2-8. Programming the ATAVRAUTO100 using ATAVRAUTO900
2.5.3 Programming with AVR JTAGICE mkII
The AT90CAN128can be preogrammed using specific JTAG link: 3-wire debug-wire
interface. To use the AVR JTAGICE mkII with an ATAVRAUTO100 an optional adaptor
should be used. Then the JTAG probe can be connected to the ATAVRAUTO100 as
shown in the following figure.
Figure 2-9. JTAGICEmkII probe connecting through debugWIRE interface.
AVR ISP
JTAGICE mkII