Spdif setup, Dolby digital setup, Dual mono – Avayon DXP-1000 G2 User Manual
Page 21: Dynamic
SPDIF SETUP
SPDIF OFF: Audio signal is out from (FL/FR) AUDIO OUT (RCA) jacks.
SPDIF OFF: Audio signal is out from (FL/FR) AUDIO OUT (RCA) jacks.
SPDIF/RAW: The player is connected to a Dolby Digital amplifier through DIGITAL OUT Coaxial or Optical jack.
You must select this for either 5.1ch or DTS 6.1ch sound.
SPDIF/RAW: The player is connected to a Dolby Digital amplifier through DIGITAL OUT Coaxial or Optical jack.
You must select this for either 5.1ch or DTS 6.1ch sound.
SPDIF/PCM: The player is connected to a 2-channel digital mode or stereo amplifier through Coaxial or Optical
jack.
SPDIF/PCM: The player is connected to a 2-channel digital mode or stereo amplifier through Coaxial or Optical
jack.
DOLBY DIGITAL SETUP
LINE OUT: Line out mode with digital dialog
normalization, compress input linear signal.
It is suitable to all television signal inputs.
DUAL MONO
Output mode of the L/R signals. Mix-mono can
be set only if the DVD is playing in 5.1ch audio.
If your amplifier has Dolby digital output mode, you
may choose STEREO, L-MONO, R-MONO, and
MIX-MONO for the decoding method.
DYNAMIC
This function is generally used when playing
high -volume programs at night, in order not
to disturb a neighbor. This setting can
dynamically lower the volume and still
keep the original tone quality. This is the
range, measured in decibels(dB), between
the loudest and the quietest sound
registers in a soundtrack.
21