Airlink ARW027 - Manual (Page 26)

20
1-3-4 PPTP
If you are using PPTP to connect to the Internet, select this option. Enter
the PPTP Account Name, PPTP Password, Host Name, Service IP
Address, Your IP Address, and Your Subnet Mask. If your ISP provided
you with a Connection ID, enter it in the Connection ID field, otherwise,
leave it as zero.
The MTU specifies the largest packet size permitted for network
transmission. Enter the value desired. For most PPTP users, it is
recommended to use the default value of 1460.
The Maximum Idle Time determines the maximum idle time allowed
before a connection is dropped (default time=0, always connected).
Connect-on-demand allows you to make a connection automatically when
there is a need for connection. Click Next to go to the next page.
1-4 DNS
If your ISP provided at least one DNS Server IP Address, type that IP
Address in the Primary DNS address field. You can enter another DNS
Server IP Address in the Secondary DNS address field. The Router will
use these addresses for quicker access to the DNS Servers. If your ISP did
not provide you with any DNS server address, just leave the fields blank.
Click Finish to complete the setup.