Apple ColorLaserWriter 12/600PS - Manual (Page 102)

This chapter describes how to set up the Color LaserWriter 12/600 PS for use
with IBM PCs or compatible computers running Windows or DOS. It
provides detailed procedures for setting up the printer for use on a Novell
NetWare network and instructions for installing and using Apple Print
Monitor for Windows and the Apple Printer Utility for Windows, provided
with your printer.
System requirements
To use the printer, your computer system must meet these requirements:
m IBM PC or compatible, with an 80386 or higher CPU
m hard disk drive
m at least 4 megabytes (MB) of random-access memory (RAM)
m Microsoft Windows 3.1 or higher or Windows for Workgroups 3.11
or higher
m MS-DOS version 3.3 or higher (5.0 or higher recommended)
m 3.5-inch floppy disk drive that reads 1.44 MB disks
m NetWare requires an 80386 CPU with NetWare version 3.0 or higher
m each user of the Apple Printer Utility or Apple Print Monitor must have
NetWare Client Software for Windows 3.12 or 4.x installed
Installing all the printer software for the IBM PC or compatible computer
requires approximately 3.5 MB of free space on your hard disk.
77
3 Setting Up the Printer for Windows
and NetWare Users Setting Up the Printer for Windows
and NetWare Users