Apple ColorLaserWriter 12/600PS - Manual (Page 200)

7 Click Express Installation.
A window appears that keeps you informed as file decompression proceeds.
Insert other printer disks (and click OK) as the program asks for them.
Instructions appear describing the next three steps in the installation
procedure. Take a moment to read them.
8 Click Continue.
The Adobe Printers control panel appears.
9 Select the Color LaserWriter 12/600 PS and click OK.
The PostScript Printer Driver files, Apple Print Monitor for Windows, and
the Apple Printer Utility for Windows are installed on the hard disk. A
message appears telling you that the driver software was successfully
installed.
10 Click OK to dismiss the message.
11 Select another printer, if any, and click OK to install. Repeat for each printer you want
to install.
12 When you’re done, click Close.
A message appears telling you to use the Printers control panel to connect
and set up the printers you’ve installed. By default, each printer uses LPT1.
The Printers control panel Setup dialog box lets you specify a different port,
for example, LPT2 or a NetWare queue.
13 Click OK to clear the message.
Another message tells you that installation is complete.
14 Click Restart Windows to have the changes take effect.
The Apple LaserWriter Software program group now appears on your
Windows Program Manager screen. Contained within the program group are
the ReadMe file, Apple Print Monitor for Windows, and the Apple Printer
Utility for Windows.
175 Windows and DOS Users