Radio – Panasonic SC-PM200 User Manual

Page 7

Advertising
background image

E

N

G

L

IS

H

ENGLISH

RQT9547

7

7

USB

You can connect and play MP3 tracks from your USB
mass storage device.
Do not use a USB extension cable. The system cannot
recognise USB mass storage device connected through
a cable.

1

Decrease the volume and connect the USB mass
storage device to the USB port.

2

Press [USB] and then press [4/9] to start

playback.

Stop
playback

Press [8] during playback.

“RESUME” is shown.
Press [4/9] to continue playback.

OR
Press [8] two times to stop the playback

fully.

For other operations, refer to “Discs” (Z 6).

Compatible devices
• USB mass storage devices that support bulk-only

transfer.

• USB mass storage devices that support USB 2.0 full

speed.

Supported format
• Folders are defined as album.
• Files are defined as track.
• Track must have the extension “.mp3” or “.MP3”.
• CBI (Control/Bulk/Interrupt) is not supported.
• NTFS file system is not supported (only FAT 12/16/32 file

system is supported).

• Some files can fail to work because of the sector size.

Note:
• Maximum album: 255 albums (including root folder)
• Maximum track: 2500 tracks
• Maximum track in one album: 999 tracks

Radio

Manual tuning

1

Press [RADIO, EXT-IN] to select “FM” or “AM”.

2

Press [3] or [5] to select the frequency of the

required station.
To tune automatically, press and hold the button until
the frequency starts changing quickly.

To improve the sound quality

When “FM” is selected

1

Press [RADIO MENU] to select “FM MODE”.

2

Press [Y, U] to select “MONO” and then press

[OK].
To cancel, select “STEREO”.

• “MONO” is also cancelled when you change the

frequency.

• Switch off “MONO” for normal listening.

When “AM” is selected

1

Press [RADIO MENU] to select “B.PROOF”.

2

Press [Y, U] to select “BP 1” or “BP 2” and then

press [OK].

Memory presetting

30 FM and 15 AM stations can be preset.

Preparation
Press [RADIO, EXT-IN] to select “FM” or “AM”.

Automatic presetting

1

Press [OK] to select “LOWEST” or “CURRENT”
frequency.

2

Press [AUTO PRESET] to start presetting.
To cancel, press [8].

Note on CDs

• This system can access up to 99 tracks.
• This system can play MP3 files and CD-DA format audio

CD-R/RW that have been finalised.

• This system can fail to play some CD-R/RW because of

the condition of the recording.

Note on MP3s

• Files are treated as tracks and folders are treated as

albums.

• This system can access up to 999 tracks, 255 albums

(including root folder) and 20 sessions.

• Disc must conform to ISO9660 level 1 or 2 (except for

extended formats).

• To play in a certain order, prefix the folder and file names

with 3-digit numbers in the order you want them to play.

Limitations on MP3 playback
• If you have recorded MP3s on the same disc as

CD-DA, only the format recorded in the first session can
be played.

• Some MP3s cannot be played because of the condition

of the disc or recording.

• Recordings will not necessarily be played in the order

you recorded them.

MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.

PM200_EP_1gb.indd 7

PM200_EP_1gb.indd 7

5/9/2011 5:15:50 PM

5/9/2011 5:15:50 PM

Advertising