Panasonic -eng - Manual (Page 35)

- 35 -
Input mode
SD card input mode
Imports the images on the SD card to the
computer
To import videos on an SD card to the personal
computer in MPEG2 format.
Motion videos recorded with an SD Video Camera are
stored on a card in SD-Video format. These motion videos
are imported onto the PC’s hard disk as editable MPEG2
files*.
Still images can also be imported onto the PC’s hard disk.
Clips of the imported data can be displayed in the library.
* MPEG2 files to be edited that have an aspect ratio of
16:9 (wide) may not be displayed correctly by
applications that do not support the SD-Video format.
These files can be converted into MPEG2 files used
commonly by using the File output mode. (
@ 157 )
• Audio from editable MPEG2 files is captured to a PC in
MPEG format (MPEG1 Audio Layer2).
1. Insert a card into the SD Video Camera.
• For details on how to insert a card, please read
carefully the Operating Instructions for the SD Video
Camera and the card.
2. Connect the SD Video Camera to the
computer and activate the SD Browser (
@ 28 ).
• Activate the SD Browser by auto start, and click [No]
to change your selection. ( @ 29 )
• If the MotionSD STUDIO has already been activated,
first exit from it.
• For information regarding SD Video Camera and PC
connection refer to the Operating Instructions of the
SD Video Camera.
3. Select the type of image to be imported from
.
[All]
Displays all images.
[Video]
Displays only motion videos.
[Still]
Displays only still images.