Panasonic -eng - Manual (Page 226)

Q&A
- 226 -
Special effects cannot be used normally
Special effects cannot be used
normally
The condition of the personal computer becomes
unstable during rendering.
• Rendering operation uses a very high percentage of
the processing power (load on the CPU) of the
personal computer. So, when software other than
MotionSD STUDIO is running, the rendering
sometimes cannot be performed well.
When using MotionSD STUDIO, we recommend to
exit other software.
Besides, if a file is copied or moved, or printing is
executed, we recommend rendering after such
operations are completed.
• The personal computer may be in an unstable state.
Exit MotionSD STUDIO, and then reboot the
personal computer.
Rendering takes long.
• Rendering of a long video clip takes a very long time.
During rendering, do not operate the personal
computer. If you operate it, rendering may not be
accomplished satisfactorily in some cases.
You wish to insert special effects in any part of a
long video clip.
• If you split a video clip, you can insert special effects
in that part.
Place the clip on the track to divide it. (
@ 75 )
When a transition effect is set, the length of the
video changes.
• If a transition effect is set, the clips before and after
the transition are shortened. This is because the
transition effect is created by blending parts of those
clips. (When the setting is cancelled, the original
length is restored.)
This section covers the solutions to troubles that often
occur when you use special effects.