Anco Eaglin A-E Votator - Manual (Page 8)

8
Votator
®
II Easy to Maintain
1
3
6
7
5
4
4
6
7
2
2
3
1
5
After any servicing or inspection, the
Votator
® II reassembles quickly and
easily: simply insert the self-aligning
spline end of the mutator shaft into the
hollow shaft in the gear motor drive.
There is no complex shaft coupling,
no sensitive stub shaft alignment, or
vulnerable drive belts to service.
Boltless V-Lock heads let you
remove the shaft for inspection or
routine maintenance in minutes..
Scraper blades are secured to the
mutator shaft by the Votator
® II
universal mounting pins, and are
easily and quickly removed and
replaced.
One-piece rotating seal body
provides durability and simplifies
maintenance.
And the seal spring is out of the
product zone.
The heat transfer tube is bolted to the
jacket assembly. The seal design for
both ends features double O-Rings.
The tube can be removed easily without
disturbing or disconnecting the media
piping.
Hydraulic lift mechanism guides the
mutator shaft through its full range of
travel.