Anco Eaglin A-E Votator - Manual (Page 9)

9
Votator
®
ll Extra Heavy Duty Scraped Surface Heat Exchanger
The Votator ® name carries with it the reputation of durability that is unequaled. The Extra Heavy Duty Votator ® II is capable
of heating and cooling products with viscosities in the 1,000,000 centipoise range. The units have high torque 17-4 PH
stainless steel drive spline, can be equipped with direct drives with up to 30 horsepower, and are available with Concentric,
Eccentric or Oval heat transfer tubes to provide optimum processing conditions for any product.
FEATURES and OPTIONS
The Extra Heavy Duty (XHD) Scraped Surface Heat Exchanger is now available as a Votator II option. The Extra Heavy
Duty option has a special heavy-duty roller bearing on the non-driven product head and a high torque 17-4 PH Stainless
Steel spline on the driven end of the Mutator shaft. The motor pedestal is modified to use a larger gear drive with a 20,
25, or 30 Horsepower motor. Other mechanical features and most options are the same as the standard Votator
® II.
•The overall dimensions of the unit and space requirements are the same as the Votator II.
•It has bayonet locking product heads without bolts.
•The integral Nord gear motor drive with a stainless steel mounting pedestal - without the traditional drive shaft
and motor coupling - reduces the overall length or height of the unit by over 2 feet.
•It has a flange bolted heat transfer tube with a double o-ring seal on each end, drastically reducing the
maintenance time associated with servicing that component.
•The mechanical seal is same design as the standard Votator ® II and is available as a single or double seal.