Avenview FO-HDMI-XX-MM - Manual (Page 7)

www.avenview.com 7
Section 2: Specifications
Item Description
Units FO-HDMI-XX-MM (Transmitter) FO-HDMI-XX-MM (Receiver
Unit Description HDMI Fiber Optic Transmitter HDMI Fiber Optic Receiver
HDMI Compliance HDMI 1.3
DVI Compliance DVI 1.0
HDCP Rev 1.1
Input Signal TMDS Signal (HDMI 1.3 Standard)
Output Signal TMDS Signal (HDMI 1.3 Standard)
Video Bandwidth 12bit Deep Color / 60Hz
Supported Resolution &
Distance
Up to WUXGA (1920x1200), 1080p @ 100 meters ( 330 feet)
Optical Converter 4 ch 850 nm Multi-Mode VCSEL 4 ch GaAs PIN photo Diode
HDMI Connector 19 pin HDMI Plug
Fiber Type 50/125 µm Multi-mode glass fiber
Power Consumption 0.8W (max) 1.05W (max)
Bending Radius 70mm
Dimensions (L x W x H) 1” x 2.9” x 0.8”
Environmental
Operating Temperature 32˚ ~ 104˚F (0˚ to 40˚C)
Storage Temperature -4˚ ~ 140˚F (-20˚ ~ 60˚C)
Relative Humidity 20~90% RH (no condensation)
Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to
the device. This is a stress rating only and functional operation of the device at these or any other
conditions above those indicated in the operations section for extended periods of time may affect
reliability.