BRAVEN 705 - Manual (Page 5)

TURN ON & PAIR VIA BLUETOOTH ®
To get started press the power
button for 2-3 seconds. When
you release the power button you
will hear the BRAVEN power-up
drone. When you’re finished
listening press the same button
again for 2-3 seconds to turn
your BRAVEN off.
In order to pair your BRAVEN to your cell phone, tablet,
or other Bluetooth
® enabled source (hereafter referred
to as a “device”), first activate Bluetooth ® on the device
(see your device’s instruction manual for information on
activating its Bluetooth
® settings).
Then press and hold the play button on your BRAVEN
until you hear the BRAVEN pairing call.
1
Next go to your device’s
Bluetooth
® settings and select
“BRAVEN 705” from the list.
If asked for a passcode, enter
“0000.” Your BRAVEN will
remember the last 8 devices it
has paired with.
NOTE: If your BRAVEN does not have an active
Bluetooth
® connection and is left on, it will shut itself
off after 30 minutes to preserve the battery. To restart
your BRAVEN you will need to press and hold the power
button for 2-3 seconds.