BRAVEN 705 - Manual (Page 7)

3
USE AS A BLUETOOTH ® RECEIVER
The BRAVEN 705 has the unique ability to act as a
Bluetooth
® Receiver for other home or audio speaker
systems that are not natively equipped for Bluetooth ®
connectivity.
Simply connect one end of a 3.5mm/aux cable to the
AUDIO IN port of your home or audio speaker system,
and plug the other end of the cable into the 3.5mm
OUT port on the BRAVEN 705 speaker. Then pair
your BRAVEN 705 speaker to your phone or tablet via
Bluetooth
® .
The audio will play over both the BRAVEN 705 and
your home or audio speaker system. If you only want the
audio to play over your other speakers (not through the
BRAVEN 705), press and hold the BRAVEN 705 volume
up (+) and volume down (-) buttons simultaneously while
the audio is playing, until the Braven 705 audio stops.
WATER-RESISTANT FEATURES
The BRAVEN 705 is IPX5 water-resistant. BRAVEN 705
speakers are not intended to be submerged in water, but
are resistant to rainfall, water jets, and water splashing.
IMPORTANT - To ensure your BRAVEN 705 speaker is
prepared for use in a wet environment, remove all cable
connections and tightly close the end water cap. If the
water cap is not properly closed,
the BRAVEN 705 will not be
water-resistant.
4