Standby screen – CatEye CC-GL50 [Stealth 50] User Manual
Page 14
14
How to use the
computer
* For information on how to start/stop measurement, view the measurement data, and
about resetting operation, see “Functions available on the measurement screen” (page 15).
* The recorded trip route can be viewed by uploading the trip to CATEYE Atlas™. For details,
see “Uploading the measurement data (trip data)” (page 20).
* When the speed sensor or speed/cadence (ISC) sensor is not used, measurement will stop
if the GPS signal cannot be received.
* The unit will be automatically turned off in 10 minutes if no speed signal or GPS signal is
received, and no button is pressed. (Auto power off)
GPS signal may not be received, thus the unit may stop measurement or may not dis-
play appropriate measurements in the following locations or environments.
• In a tunnel, underground and building, between high-rise buildings, under an elevated
structure and arcade, etc.
• In bad weather (snow, rain, etc.)
• Near a high-voltage line or a mobile telephone relay station.
• When the computer display does not face to the sky.
Standby screen
The display will be automatically changed to the standby screen in 10 minutes if there is no
bicycle motion or button operation while receiving the speed signal or GPS signal with the
measurement screen. Riding again returns to the measurement screen.
* The unit turns off the power automatically in 50 minutes with the standby screen dis-
played. (Auto power off)
* When the GPS signal cannot be received with the standby screen displayed, the GPS signal
non-receiving icon (
) flashes. When the speed signal cannot be received, even riding
again does not return to the measurement screen.
Power ON/OFF
POWER
MODE
MODE
GPS search screen
Measurement screen
Power OFF
When the speed
signal or GPS
signal is received
When the speed
signal or GPS signal
cannot be received
Current speed
0.0 (3.0) – 105.9 km/h
[0.0 (2.0) – 65.9 m/h]
GPS signal
To be changed according
to the GPS signal receiv-
ing status.
Speed signal
Speed unit
Clock
0:00 – 23:59
[AM1:00 – PM12:59]
Date
(press & hold)
S
No operation
for 10 minutes
No operation
for 10 minutes
or
Standby screen
Changed automatically
Changed by operating buttons
No operation
for 50 minutes