CatEye CC-GL50 [Stealth 50] - Manual (Page 19)

19
Introduction
How to install the
unit on your bicycle
Setting up the
computer
How to use the
computer
Uploading the
measurement data
Changing the
computer
configuration
Others
Setup of your PC
Setting CATEYE Sync™
After installing CATEYE Sync™, configure the login setting for CATEYE Atlas™.
* When uploading the trip data only to STRAVA™ or TrainingPeaks™, the following setting is
not required.
1 Start CATEYE Sync™.
Double-click on the shortcut [CATEYE Sync™] to start CATEYE Sync™.
2 Click on [Q Series / STEALTH].
The menu screen appears.
3 Click on [Settings].
The setting screen appears.
4 Click on [Account setting] and enter your e-mail address and password.
Enter correctly the e-mail address and password you registered at CATEYE Atlas™.
5 Click on [Apply].
Login setting for CATEYE Sync™ is completed.
Now, setup of your PC is completed.
* For information on how to upload the trip data, see “Uploading the measurement data
(trip data)” (page 20).
* With CATEYE Sync™, you can synchronize the settings configured in “Setting up the
computer” (page 7) with the computer (except for paring). For details, see “Changing
the computer configuration” (page 27).
* When using CATEYE INOU, click on [INOU] to start INOU Sync. When you use CATEYE
INOU for the first time, download CATEYE Sync™ INOU from CATEYE Atlas™ to install it.