CatEye CC-PA100W [Padrone] - Manual (Page 8)

2
4
1
Appendix
SET
3
8
(Press and hold)
MODE
MODE
Starting/stopping measurement
Measurement starts automatically when the bicycle
moves.
During measurement the measurement unit (km/h or
mph) flashes.
Resetting data
Pressing and holding MODE when on the measurement screen resets
all measurement data to 0 (excluding Odo).
Power-saving function
Starting measurement
If the computer does not receive
any signal for 10 minutes, the pow-
er-saving screen is activated and
only the clock is displayed.
If MODE is pressed or a sensor
signal is received while the power-
saving screen is activated, the com-
puter returns to the measurement
screen.
* When the computer is left on
the power-saving screen for 1
hour, the display only shows the
measurement unit. When the
computer is in this state, you can
return to the measurement screen
by pressing MODE.
[Measurement screen]
1 hour
10 minutes
Sleep
Power-saving
screen
Measurement
stops
Measurement
starts