CatEye CC-RD310W [Strada Wireless] - Manual (Page 4)

Adjust the sensor magnet so that the conditions of , , are satisfi ed, and then check the operation
by turning the front wheel slowly.
Positioning and testing
SENSOR ZONE
Max.
60 cm
(23-5/8” )
SENSOR ZONE SENSOR ZONE
SENSOR ZONE
5 mm
(3/16”)
Mounting on right front fork Mounting on left front fork
STRADA WIRELESS CC-RD310W ENG 4 How to install the unit on your bicycle
Install the sensor and magnet in a position
where the following conditions are satisfi ed.
2 Install the sensor and magnet
Remove/Install the computer
The distance from the computer to the sensor is within the trans-
mission data length, and the back of the computer faces downward.
The magnet passes through the sensor zone of the speed sensor.
The clearance between the sensor surface and the magnet is
within 5 mm.
3
SENSOR ZONE
SENSOR ZONE
While supporting it by hand,
Push it out as if lifting the front up
To the SENSOR ZONE Spoke
Magnet
Speed sensor
Click
SENSOR ZONE Magnet
Cut
Sensorpad
Speed sensor
Nylon tie
Pull securely
* The wheel magnet may be installed anywhere on
the spoke if the installation conditions are satisfi ed.
Magnet
Magnet
SENSOR ZONE
Speed sensor
Speed sensor