ARCHOS box rock - Manual (Page 59)

4.5 CLOCK (RECORDER ONLY)
Clock
This is a fully featured analogue and digital clock program.
Key configuration
KEY ACTION
F1 Help
F2 Start / Stop stopwatch
F2 (Hold down) Reset stopwatch
F3 Options
Play Select clock mode
UP Enable idle power off
DOWN Disable idle power off
RIGHT Enable backlight
LEFT Disable backlight
OFF Save settings to disk and exit
Backlight configuration
If RIGHT or LEFT is not pressed during clock operation (with the exception of at the
Help/Options/Mode Selector/Credit screens) then the Backlight timeout will remain
your Rockbox default setting (example, 15 seconds). If RIGHT or LEFT is pressed,
Clock will set the backlight to ON or OFF, respectively. When Clock is exited, your
default Rockbox setting for Backlight will be restored.
Saving Settings
Settings are saved to disk when Clock is exited. They are saved to
“/.rockbox/rocks/.clock_settings”. To reset your settings back to the defaults,
simply navigate to this file using Rockbox, highlight it, and press the ON+PLAY keys to
get the Delete option. This way you can feel free to experiment with the settings - and
you could even load separate settings, say, one for your desk at home and one for in
the car - by keeping two files in your /.rockbox/rocks folder such as "h.clock_settings"
and "c.clock_settings". Simply remove the "h" for your home settings to go into effect,
or add the "h" back and take off the "c" for your car settings.
In the future, loading different settings will probably be made easier through a built-in
settings file loader in Clock.
Rockbox User Manual