ARCHOS box rock - Manual (Page 63)

Controls in the split editor
RECORDER ONDIO FUNCTION
OFF ON/OFF Quit plugin
LEFT/RIGHT LEFT/RIGHT Move the split point indicator
UP/DOWN UP/DOWN Zoom in / out
PLAY MODE Play from the split position
F1 MODE+LEFT Enter the save dialogue
F2 MODE+UP Toggle loop modes
F3 MODE+RIGHT Toggle logarithmic / linear scaling
ON+LEFT Play half speed
ON+RIGHT Play 150% speed
ON+PLAY Play normal speed
Save the files
In the save dialogue it is possible to specify which of the files you want to save and
their names. When finished, select "Save" and the files will be written to disk. Note
that files can not be overwritten, so filenames that don't exist yet must be chosen.
If unsure whether the file already exists simply try to save it. If another file with
this name exists the dialogue will return and you can choose another filename.
Save dialogue
Controls in the save dialogue
RECORDER ONDIO FUNCTION
UP/DOWN UP/DOWN Select item
PLAY RIGHT Toggle / edit item
Scale
The values in the waveform are scaled according to the settings of the peak meter.
These can be altered in the menu "General Settings -> Display -> Peak Meter". If
extreme minimum / maximum values are set the waveform might be cut off. A
minimum setting of -60 dB and a maximum setting of 0 dB are recommended. These
settings should be capable of producing useful waveforms for very soft sounds in
logarithmic mode (dB). When the editor is used on loud sounds (such as commercial
rock or pop music) switching to the linear scale may prove more effective since the
logarithmic scale compresses loud noises and makes it more difficult to identify
characteristic shapes. Note that it is always possible to toggle the scale with F3.
Rockbox User Manual