Features and controls - continued – Aastra Telecom BE-100HT User Manual
Page 6
Advertising
- 6 -
An optional belt clip is supplied with your BE-100HT headset
telephone. It can be easily installed or removed as required. See
Figure 2
1. Insert the belt clip mounting tabs into the corresponding
mounting holes located on the rear surface of the BE-100HT.
2. Confirm the belt clip mounting tabs are aligned correctly.
3. Press the belt clip towards the right side of the BE-100HT to
lock the belt clip in place.
FEATURES AND CONTROLS - continued
Figure 2
B E LT C LIP
TELEPHO N E
Advertising