EXONIC EXD 4500T - Manual (Page 19)

Radio Operation
19
Listening to the Radio
Selecting The Frequency Band
FM1 FM2 FM3
AM2(MW2) AM1(MW1)
Start Searching For a Station
Touch the MOD range repeatedly
on the touch screen to select the
RADIO mode. (You can also
press repeatedly the
/ MOD
button to select the RADIO .)
Switching To Radio Mode
the following information will appears on
the display :
MOD
Touch the BND section on the
touch screen repeatedly to select
the band , screen band will show
in turn :
You can also press the BND on front
panel repeatedly to select the band .
(
)
BND
Touch the ST section on the
touch screen (or press ST/MO
button on the remote) to select
the MONO or STEREO mode .
When an FM stereo broadcast is
hard to receive
(
)
When Stereo mode is activated, the ST
symbol will appear .
ST
Touch it to previous .
Touch it to select the other item .
FM1 106.30
MHz
ST DX
CH
6
LUD SWF POP 11:08AM
4 5 6
2 3 1 MOD
BND
During Radio mode, swing the SEL
knob in
direction (or touch the “ ”
section briefly) to increase frequency
by one step of channel spacing .
Swing the SEL knob in direction
(or touch the “ ” section briefly) to
decrease frequency by one step of
channel spacing .
Manual Search
Automatic Search
During Radio mode, swing and hold
(for about 2 seconds )the SELknob in
/ direction (or touch the
section long) to start search for a radio
station automatically .
/
FM1 106.30
MHz
ST DX
CH
6
LUD SWF POP 11:08AM
DSP CLK APS SWF LUD ST
VOLUME- SEL VOLUM+
FM1 106.30
MHz
ST DX
CH
6
LUD SWF POP 11:08AM
4 5 6
2 3 1 MOD
BND