EXONIC EXD 4500T - Manual (Page 24)

DISC Search (GOTO)
FOR DVD :
Touch the screen the GOTO range
(or press GOTO on the remote ).
Twice, the screen will display the
following message :
Title 01/01 Time -:--:--
0:10:36
You can select the item you want to
watch through TIME setting by using
numberic buttons . (E.x. 0:10:36)
FOR VCD (With PBC OFF):
Touch the screen the GOTO range
(or press GOTO on the remote ).
Once, the screen will display the
following message :
Disc Go To --:--
00:36
Use the numberic buttons to input the
time directly (E.x. : 00:36)
Touch the GOTO section , it display will
following as below :
24
DISC Operation
AUX Operation
3). You now hear the sound from the
external device played back through
the loudspeakers .
4). Touch the volume+/- sections on
touch screen or rotate the VOL+/- on
the remote to adjust the volume level.
1). Please connect the external device
with stereo jack plug the Aux in socket .
To connect analogue replay devices.
Use this jack to replay sound of other
replay equipment such as DVD players,
computers, etc. Via the loudspeakers.
Touch and hold the / section on
the touch screen , you can select the
title or chapter of DVD . (Only for the
DVD with title /chapter.)
Note:
7/ 9/
2). Touch the MOD section on screen
or press the MOD button to select the
AUX IN connection. It will display the
following as below :
GOTO
GOTO
GOTO
CLK DSP
SEL
LUD SWF POP 11:08AM
DISC IN
AUX IN
LUD SWF MOD
VOLUME- VOLUME+
Touch to select
Title 01 /01 , Chapter --/15
5 4 3 2 1 0
+10 9/ 8 7/ 6
AUX Socket
AUX IN
RET
TOUCH SCREEN
GOTO
SET
TITLE
SUBTITLE AUDIO
LUD SWF POP 11:08AM
DISC IN
DVD 11-0:44:36
RPT