ADC MM701G2 - Manual (Page 47)

April 14, 2006 Chapter 5: Configuring System Parameters
MM70xG2-UM-03 5-5
A DD S TATIC R OUTE E NTRIES
A static route provides a defined path from one host or network to a destination host or network. This type of route is
manually entered as a fixed path, as contrasted to a dynamic route which is automatically determined and learned
(RIP, for example). If the next gateway for network traffic is unknown, a static route will be its default path. Adding a
system default gateway creates a default static route entry in the Static Routes table.
Step Action
1 Select System on the menu bar, then select Static Routes under Configuration to access the Static
Routes page.
Figure 5-5. Static Routes