ADC MM701G2 - Manual (Page 64)

Chapter 7: Implementing a Point-to-Point LAN Extension April 14, 2006
7-2 MM70xG2-UM-03
Configure for Central-Office Mode
Change the LAN IP Address for the Central-Office Modem
Because the Central-Office and Remote modems by default have the same IP Address 10.0.0.1 point-to-point
application, you must change the IP address for the Central-Office modem or Remote Modem.
Step Action
1 Select DSL on the menu bar, then select Advance Configuration under DSL Options.
Figure 7-1. G.SHDSL Advanced Configuration—Configure for Central-Office Mode
2 In the Operating Mode box, select Central-Office to set up this modem for this mode.
3 Click Apply.
Step Action
1 Select LAN on the menu bar to access the LAN Configuration page.
Figure 7-2. LAN Configuration