Reset to factory defaults, Figure 9-10.updating flash, Figure 9-11.software upgrade complete – ADC MM701G2 User Manual
Page 86: For det
Advertising
Chapter 9: Managing the Modem
9-12
Reset to Factory Defaults
When you configure the modem, you change the factory default settings to new values. You can return these
parameters to their default values to provide a known starting point if you are troubleshooting or if you simply want to
configure new parameters. For session default values, see
“Default Session Parameter Values” on page B-4
.
There are three ways to reset the modem to its factory default values:
• Using the Web Interface (below)
4
Click Update Flash when prompted.
Figure 9-10. Updating Flash
5
Click Restart when prompted.
Figure 9-11. Software Upgrade Complete
Step
Action
Advertising
This manual is related to the following products: